No products in the cart.
460m3/hr
Martec Profile Plus 2 White
$219.00
The Martec Profile Plus 2 Bathroom Exhaust, Heat and Light Combo features a stylish and sleek design. With a super slim, slightly curved profile, it is a high extraction 3 in 1 bathroom heater & exhaust fan – ideal for contemporary bathroom interiors. The Martec Profile Plus 2 LED incorporates a sleek modern design with the latest lighting technology. Featuring instant heat and 1890 lumens from the advanced energy efficient LED lamp fittings.
| Manufacturers Part Number | MBHP2LW |
|---|---|
| Colour | White |
| Capacity (m3/hr) | 0460 m3/hr |
| Capacity (l/s) | 127.78 l/s |
| Motor Wattage | 045w |
| Noise Level | 55 dB(A) |
| IP Rating | No IP Rating |
| Ceiling Hole Size | 435mm x 255mm |
| Required Ceiling Depth | 210mm |
| Duct Size | 125mm |
| Light | Included |
| Light Type | LED |
| Light Temperature | 3000k – Warm White |
| Light Wattage | 6W |
| Number of Heat Lamps | 2 |
| Heat Lamp Wattage | 2 x 275W |
| Material | Plastic |
| Installation | This fan requires hardwiring by an electrician |
| Manufacturer | Martec |
| Warranty | The manufacturer offers a 3 year limited in-home warranty protection (conditions apply) |
| General Exhaust Fan Advice | It is recommended to achieve a minimum of 15 air changes per hour in a bathroom to remove excess moisture., To work this out, calculate the volume of air in the room ( length x width x height, all in meters) and multiply this by the number of air changes to get the required air volume of the fan. |
Dimensions
AIR QUALITY