No products in the cart.
843m3/hr
Xpelair WX9 High Capacity Commercial Intake/Extract Wall Fan
$329.00
The Xpelair WX9 Wall Intake/Extraction fan is a high quality fan made in the UK. It extracts air at a rate of 843 m3/hr and can be switched to intake mode, where it works at a rate of 547 m3/hr. This model is suitable for single, cavity brick and current timber walls between 275-375mm thick.
| Manufacturers Part Number | WX9 |
|---|---|
| Colour | White |
| Capacity (m3/hr) | 0843 m3/hr |
| Capacity (l/s) | 234 l/s |
| Motor Wattage | 045w |
| Current | 0.18A |
| Noise Level | 48 dB(A) |
| IP Rating | IP55 |
| Wall Hole Size | 345mm x 375mm |
| Material | Plastic |
| Installation | This fan requires hardwiring by an electrician |
| Manufacturer | Xpelair |
| Warranty | 1 year replacement warranty |
| General Exhaust Fan Advice | It is recommended to achieve a minimum of 15 air changes per hour in a bathroom to remove excess moisture., To work this out, calculate the volume of air in the room ( length x width x height, all in meters) and multiply this by the number of air changes to get the required air volume of the fan. |
Dimensions
AIR QUALITY