No products in the cart.
460m3/hr
Martec Profile Panel 4 White
$269.00
The Martec Profile Panel 4 Bathroom Exhaust, Heat and Light Combo features a stylish and sleek design. With a super slim profile, it is ideal for contemporary bathroom interiors. It is a high extraction 3 in 1 bathroom heater and exhaust fan. The Martec Profile Panel 4’s LED incorporates CCT technology into its sleek design. This unit also produces instant heat from its 4 radiant heat lamps, and allows the user to run the heater at either 50% or 100 % capacity.
| Manufacturers Part Number | MBHN4LW |
|---|---|
| Colour | White |
| Capacity (m3/hr) | 0460 m3/hr |
| Capacity (l/s) | 127.78 l/s |
| IP Rating | No IP Rating |
| Ceiling Hole Size | 435mm x 275mm |
| Required Ceiling Depth | 210mm |
| Duct Size | 120mm |
| Light | Included |
| Light Type | LED |
| Light Temperature | CCT (Colour Changing Technolog) – 3000K – 4000K – 5000K |
| Light Wattage | 12w |
| Number of Heat Lamps | 4 |
| Heat Lamp Wattage | 4 x 275W |
| Material | Plastic |
| Installation | This fan requires hardwiring by an electrician |
| Manufacturer | Martec |
| Warranty | The manufacturer offers a 3 year limited in-home warranty protection (conditions apply) |
| General Exhaust Fan Advice | It is recommended to achieve a minimum of 15 air changes per hour in a bathroom to remove excess moisture., To work this out, calculate the volume of air in the room ( length x width x height, all in meters) and multiply this by the number of air changes to get the required air volume of the fan. |
Dimensions
AIR QUALITY