$449.00 $419.00
The Martec Aspire 3 in 1 exhaust fan features a Tri colour LED CCT light, giving you a choice between cool, natural or warm white lighting in your bathroom. The fan itself extracts air at a rate of up to 380 m3/hr, allowing you to enjoy a clean fresh bathroom. In Winter, you’ll also appreciate the heat from the Aspire’s 2 infrared heat tubes.
| Manufacturers Part Number | MBHA800W |
|---|---|
| Colour | White |
| Capacity (m3/hr) | 0380 m3/hr |
| Capacity (l/s) | 105.55 l/s |
| Motor Wattage | 055w |
| Noise Level | TBC |
| IP Rating | IPX2 |
| Ceiling Hole Size | 523mm x 345mm |
| Required Ceiling Depth | 200mm |
| Duct Size | 150mm |
| Light | Integrated LED Light |
| Light Type | LED |
| Light Temperature | CCT (Colour Changing Technology) – 3000K – 4000K – 5000K |
| Light Wattage | 20w |
| Number of Heat Lamps | 2 |
| Heat Lamp Wattage | 2 x 400W |
| Material | Metal |
| Installation | This fan requires hardwiring by an electrician |
| Manufacturer | Martec |
| Warranty | Martec: This fan comes complete with a 2 year Manufacturer's in-home warranty. Lights and controls have a seperate warranty. Conditions apply – see www.martecaustralia.com.au |
| General Exhaust Fan Advice | It is recommended to achieve a minimum of 15 air changes per hour in a bathroom to remove excess moisture., To work this out, calculate the volume of air in the room ( length x width x height, all in meters) and multiply this by the number of air changes to get the required air volume of the fan. |
AIR QUALITY
Martec Aspire 3-in-1 Exhaust Fan Data Sheet