Hunter Pacific Pinnacle v2 DC Main Features
Suitable for installation in a pergola or outside in a sheltered area, protected from wind. An accessory 38-degree canopy kit can be purchased separately for installation on raked ceilings up to 38 degrees. (See accessories below.)
Installation Location | Indoor, Outdoor (Undercover) & Coastal |
---|---|
Blade Material | Plastic |
Overall Diameter | 132cm (52″) |
Blade Pitch | 12 Degrees |
Motor Type | DC motor |
Operation | Remote Control & Wall Control |
Summer / Winter use? | Reversible from remote |
Ceiling to Blade Drop | 255mm (315mm to base of light) |
Angled Ceilings? | Suitable for FLAT ceilings only |
Light | Not Included |
Hunter Pacific Pinnacle v2 Performance Data
Speed | RPM | Wattage | Airflow |
---|---|---|---|
1 | 73 | 2.8 | Not Tested |
2 | 92 | 3.8 | Not Tested |
3 | 148 | 9.5 | Not Tested |
4 | 160 | 12.4 | Not Tested |
5 | 175 | 15.4 | Not Tested |
6 | 190 | 17.8 | Not Tested |
7 | 200 | 21.3 | Not Tested |
8 | 210 | 22.8 | Not Tested |
9 | 215 | 25.4 | 14,000 m3/hr |
Note: Fan & components must be installed by Qualified Persons.
Janet –
Easy to use, quiet, effective in Sydney’s humdity