Manufacturers Part Number | HV-180AE |
---|---|
Colour | White |
Capacity (m3/hr) | 0380 m3/hr |
Capacity (l/s) | 105.55 l/s |
Current | 0.13A |
Noise Level | 35.6 dB(A) |
IP Rating | IPX4 |
Wall Hole Size Tolerance | 220mm – 225mm Round |
Window Hole Size Tolerance | 220mm – 225mm Round |
Material | Plastic |
Installation | This fan requires hardwiring by an electrician |
Manufacturer | Fantech |
Warranty | The manufacturer offers a 1 year replacement warranty (conditions apply) |
General Exhaust Fan Advice | It is recommended to achieve a minimum of 15 air changes per hour in a bathroom to remove excess moisture., To work this out, calculate the volume of air in the room ( length x width x height, all in meters) and multiply this by the number of air changes to get the required air volume of the fan. |
380m3/hr
HCM 180 Window/Wall Exhaust Fan
$349.00
The HCM 180 Exhaust fan is suitable for all types of small or confined areas. It is mainly used for window installations, however can be used on thin walls. Please Note – If you require this HCM Exhaust fan for wall installation for a wall thicker than 25mm you will need to purchase a set of wall rods and a wall tube.
- Low Profile Design
- Rated “Continuous Run”
- 220-240V, single-phase, 50Hz
- Wall rods & tubes for wall mounting available in
the accessories section.
Suitable for installation only on glass up to 8mm thick
trung (verified owner) –
it is all good only one thing you need to consider about return when people order wrong one
Michael –
Ease of purchase procedure & Fast dispatch of then Product.
N. Balzer –
Quiet bathroom fan with good air movement
Laurie Sparks –
The fan was easily fitted although there were no instructions – really unnecessary as the wiring was extremely simple. The fan looks great & is a vast improvement on the bulky & ancient fan that it replaced. Works quietly & efficiently.